Print…

You Searched For: Heaters

Heaters use the best methods to evenly increase the temperature for samples contained in test tubes, beakers, flasks, and crucibles. Spirit lamps, gas burners, heating mantles, hot air dryers, hotplates apparatuses may use gas or electric power to generate heat required. Ceramic and insulated steel designs provide stable heating sources while still delivering on user safety or lab efficiency. The selection of heaters will accommodate any vessel being used and the procedure requirements.

Heaters use the best methods to evenly increase the temperature for samples contained in test tubes, beakers, flasks, and crucibles. Spirit lamps, gas burners, heating mantles, hot air dryers, hotplates apparatuses may use gas or electric power to generate heat required. Ceramic and insulated steel designs provide stable heating sources while still delivering on user safety or lab efficiency. The selection of heaters will accommodate any vessel being used and the procedure requirements.


163  results were found

Refine Results Sort by
SearchResultCount:"163"

Sort Results

List View Easy View

Rate These Search Results

Product Image-WART8.204.000

Fuego SCS and Fuego SCS pro gas safety burners

Supplier: WARTEWIG
Description: Fuego SCS and Fuego SCS pro gas safety burners have the latest safety technology. Thanks to their innovative design and an extensive range of standard equipment, these laboratory gas burners are suitable for all applications that require a flame in the laboratory. The low profile housing allows you to work in comfort, and the streamlined design reduces the impact of air currents on clean room workbenches. The SCS (safety control system) uses the latest safety technology, constantly analysing potential dangers and triggering protective measures when necessary - such as the interruption of the gas supply. After prolonged use a residual heat indicator signals that the burner head is still hot, to help to prevent burns. Made entirely of stainless steel, and thanks to its fireproof controls and a display protected by special glass, the Fuego SCS can withstand even extreme laboratory conditions.

Product Image-705-0464

Multi-position heaters for flasks, KI 16 / KI 26

Supplier: GERHARDT
Description: Serial flask heaters for six flasks with a volume of either 50 - 250 ml or 250 - 750 ml.

New Transparency for European Customers

Have you noticed our new improved visibility on stock location at checkout?

Find out more

Enhancement to stock locations

Image Unavailable-238-5660

Interlining Gun

Catalog Number: (238-5660)
Supplier: STEINEL
Description: Interlining gun with electronically controlled heating and high power - for professionals and amateurs .Simple operation due to mechanical feed device glue sticks and high power melting brought the gun into the category of first-class tool for users who prefer quality products.
UOM: 1 * 1 items
Product Image-RSGA253.030

Bunsen burners

Supplier: RSG
Description: Bunsen burner made of stainless steel.

Image Unavailable-STEI008192

Hot air tool, HL 2020 E

Catalog Number: (STEI008192)
Supplier: STEINEL
Description: This electronically controlled hot air tool HL 2020 E with LCD is ideal for shaping tiles, de-soldering circuit boards, welding plastics, drying repair filler, shrinking cable sleeves, soldering pipes and a whole lot more.
UOM: 1 * 1 items
Product Image-WART2.100.000

Safety Bunsen Burner, Flame 100

Catalog Number: (WART2.100.000)
Supplier: WARTEWIG
Description: The Flame 100 is ideally suited for all flame related applications in the laboratory. The flame starts immediately at the push of a button; a match or pilot flame is not necessary.
UOM: 1 * 1 items
Product Image-WART6.000.400

Autoloop Pro

Supplier: WARTEWIG
Description: The inoculation loop carrousel Autoloop Pro, which is suitable for up to four inoculation loops, was developed to comply with current requirements in microbiological, cellbiological and biotechnological laboratories.

Product Image-411-3320

Dryers for laboratory glassware, STL

Catalog Number: (411-3320)
Supplier: GERHARDT
Description: This hot air fan is a reliable rapid drying of laboratory glassware. A rotary hollow support stem is mounted on the base, with 56 lateral drying tubes.
UOM: 1 * 1 items
Product Image-453-1995

Hotplate for flasks

Supplier: GERHARDT
Description: For 250 to 1000 ml flasks. Stainless steel reflector with built-in heating coil for heating.

Product Image-GESTST81

Electrical sandbaths, LHG

Supplier: GESTIGKEIT HARRY
Description: Aluminium alloy plate, stainless steel housing with variable temperature control.

Image Unavailable-GESTHT03

Hotplates

Supplier: GESTIGKEIT HARRY
Description: Heating plate, Hotplate, HT 33-400, aluminium alloy plate , Temp.: 130...370 °C, Heating area: 430×580 mm, Heating capacity: 4000 W, W×D×H: 442×592×170 mm

Image Unavailable-STEI350116

Hot air tool, HG 5000 E

Catalog Number: (STEI350116)
Supplier: STEINEL
Description: Powerhouse with ceramic heating element. Electronically controlled hot air gun HG 5000 E.
UOM: 1 * 1 items
Image Unavailable-STEI351403

Hot air tool, HG 2120 E

Catalog Number: (STEI351403)
Supplier: STEINEL
Description: Electronically controlled single-hand operation tool is ideal for heat-shrinking, shaping, welding or stripping process depending on nozzles attached.
UOM: 1 * 1 items
Image Unavailable-453-2127

Ceran® hotplates, THERM CT10

Catalog Number: (453-2127)
Supplier: GESTIGKEIT HARRY
Description: Ceran® THERM CT 10 is an glass ceramic instrument. It is extremely resistant to breakage, temperature changes, will not distort and permeable to UV light and also highly acid resistant. The temperature is controlled by an output controller without any performance loss. Heating time for 500 °C is approximately 3 min. The low mass CERAN® plate with a central diameter of 150 mm is electrically heated and is mounted on a stainless steel housing.
UOM: 1 * 1 items
Image Unavailable-L050/01

Bunsen burners

Supplier: MURRAY S
Description: Bunsen burner with heavy gauge steel base.

Product Image-HORO7001-7002-7003

Electric lab burner with regulator

Catalog Number: (HORO7001-7002-7003)
Supplier: HORO DR ING HOFMAN
Description: Electric laboratory burner which can be operated as a 'stand alone' burner or with a glass support and/or power regulator.
UOM: 1 * 1 SET
Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us on +353 1 88 22222.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us on +353 1 88 22222.
This product is marked as restricted and can only be purchased by approved Shipping Accounts. If you need further assistance, email VWR Regulatory Department at eurega_services@eu.vwr.com
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organisation. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
Product(s) marked with this symbol are discontinued - sold till end of stock. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service on +353 1 8822222.
113 - 128 of 163
no targeter for Bottom