Sort Results

List View Easy View
SearchResultCount:"130476"
Description: This system is used to fully desalinate faucet water for BINDER climate chamber humidification systems. The ion exchanger system consists of a pressure container, a single-use filter cartridge and a pressure container lid.
Catalog Number: BIND8012-0759
UOM: 1 * 1 items
Supplier: Binder


Description: The Aqua-Soft system provides a continual supply of soft water and is suitable for water with a hardness up to 71° dH. It operates as a level controlled two-tank system, consisting of two cartridges with ion exchange resins and a salt reservoir. The resins are enriched with sodium ions. The hard water flows over the resins in the first cartridge, where calcium and magnesium ions are exchanged for sodium ions. At this time, no water is flowing through the second cartridge. When one cartridge is exhausted, the water is routed to the second cartridge by means of a hardness level selector corresponding to the hardness of the local water, which is inserted by customer service when the device is used for the first time. At the same time, the regeneration of the resins from the exhausted container is activated. For this treatment, brine (NaCl) is drawn from the salt reservoir. The reservoir must be replenished regularly with coarse salt pellets. Fill quantity approx. 25 kg.
Catalog Number: 141-0552
UOM: 1 * 1 items
Supplier: MIELE


Description: Aqua purifier for two full or partial demineralisation cartridges. The casing made from white steel or stainless steel.
Catalog Number: MIEL10087320
UOM: 1 * 1 items
Supplier: MIELE


Description: The water purifier can be used to produce deionised water at 0,8 to 1 μS/cm, suitable for the final rinsing of instrument washers. The system uses mixed bed resins (disposable) which can also retain silica. When the resins run out, they can simply be replaced with the MI700WP kit.
Catalog Number: SMEGWP3010
UOM: 1 * 1 items
Supplier: SMEG


Description: These wall-mounted deionisers are cost-effective stand-alone systems that provide 30 to 90 l of primary or deionized grade water for a wide range of laboratory and general manufacturing applications.
Catalog Number: 171-0421
UOM: 1 * 1 items
Supplier: ELGA LabWater


Description: These deionisers are offer a simple, cost effective method of producing 1 to 10 μS/cm purified deionised water at low volumes. Typically these units are ideal where water usage is up to 10 litres per day.
Catalog Number: PURIL991020
UOM: 1 * 1 items
Supplier: Purite


Description: WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun (refer to descriptions for models that include gun) at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.
Catalog Number: LBCP9000732
UOM: 1 * 1 items
Supplier: LABCONCO


Description: The standard canister is made of V4A stainless steel with widespread pure water supply applications. They are aslo suitable for second stage purification steps following reverse osmosis. The unique behropur® slit-jet system distributes the input water uniformly over the entire resin bed, thus maximizing exchange capacity and water quality.
Catalog Number: BEHRB00223482
UOM: 1 * 1 items
Supplier: BEHR


Description: Ion exchanger for purified water.
Catalog Number: HECH40075010
UOM: 1 * 1 items
Supplier: GLASWARENFABRIK KARL HECHT


Description: It is a simple, cost effective method for deionisation or pretreatment of lab water. Typically these units are ideal where water usage is up to 38 litres per day.
Catalog Number: BARND0805
UOM: 1 * 1 items
Supplier: Thermo Fisher Scientific


Description: These deionisers are thick-walled, robust and practical mixed-bed ion exchangers made of blue polyethylene with free output to the storage tank. Ideal also for subsequent demineralisation of reverse osmosis system or for an ambitious aquarist.
Catalog Number: BEHRB00223463
UOM: 1 * 1 items
Supplier: BEHR


Description: Mixed bed ion exchanger for small to medium quantities of ultrapure water to the supply from laboratory dishwashers to general care in the laboratory and for smaller consumers in the industry.
Catalog Number: BEHRB00223471
UOM: 1 * 1 items
Supplier: BEHR


Description: Pressure-resistant water deionisation cartridges made from stainless steel, filled with regenerable mixed-bed resins.
Catalog Number: 172-4153
UOM: 1 * 1 items
Supplier: ENVIROFALK PHARMAWATERSYSTEMS


Description: Pressureless water deionisation cartridge with plastic housing, filled with regenerable mixed-bed resins.
Catalog Number: 172-4109
UOM: 1 * 1 items
Supplier: ENVIROFALK PHARMAWATERSYSTEMS


Description: These B-Pure™ laboratory-grade water systems are designed for pre-treatment or deionization application needs. The design provides the ability to add additional holders when the need arises. Choose from single, double or half-size holders.
Catalog Number: BARND4511
UOM: 1 * 1 items
Supplier: Thermo Fisher Scientific


Description: Ready-to-connect systems for the production of soft water.
Catalog Number: WERN199234
UOM: 1 * 1 items
Supplier: ENVIROFALK PHARMAWATERSYSTEMS

New Product


1 - 16 of 130 476