Print…

You Searched For: Centrifugal+Evaporators


4 324  results were found

Refine Results Sort by
SearchResultCount:"4324"

Sort Results

List View Easy View

Rate These Search Results

Product Image-531-0998

Vacuum concentrators, refrigerated, CentriVap®

Supplier: LABCONCO
Description: The refrigerated CentriVap centrifugal concentrator is designed to rapidly concentrate multiple small heat-sensitive samples, such as RNA and proteins, using centrifugal force, vacuum and controlled temperature. The concentrator combines a refrigeration system that cools to −4 °C with a heater that warms to 100 °C to achieve the user's desired set point temperatures. With an epoxy-coated aluminum chamber.

Product Image-531-0219

Vacuum evaporation systems, RapidVap®

Supplier: LABCONCO
Description: These systems use vacuum along with heat and vortex motion to help speed evaporation and provide an alternative to traditional centrifugal evaporation methods. The systems may be used with a broad range of aggressive chemicals. Heat is supplied by a dry block heating system that, unlike water baths, adds no potential source of contamination and requires no maintenance.

Discover novel ways to accelerate your research

Flexible and easy to use, from full-spectrum DNA analysis in just 5 seconds to automated image-based cell analysis over several days.

Discover now

TECAN microplate readers

Learn more
Image Unavailable-531-0960

Accessories for centrifugal concentrators, bench top, CentriVap®

Catalog Number: (531-0960)
Supplier: LABCONCO
Description: Glass trap, 2550 ml, for use in FreeZone freeze dry units
UOM: 1 * 1 items
Product Image-LBCP7482200

Dry evaporation systems, N₂/48, RapidVap®

Supplier: LABCONCO
Description: This system uses nitrogen blow down, vortex motion and heat to speed evaporation of up to 48 small samples or eight 450 milliliter samples at once.

Product Image-531-1077

Evaporation system, RapidVap® N₂

Supplier: LABCONCO
Description: An efficient, automatic evaporator system which can be used with a broad range of aggressive chemicals. In RapidVap N₂ systems, a stream of nitrogen or dry gas is directed downward onto the surface of the sample. Nitrogen blow-down reduces the partial pressure directly over the liquid to speed evaporation and help remove the solvent as it evaporates. Nitrogen may be programmed for 2, 4, 6 or all 8 tube locations. Vortex motion and dry heat may also be applied to further accelerate processing.

Product Image-LBCP7320035

Dry evaporators, RapidVap® Vertex™ Dry

Supplier: LABCONCO
Description: This evaporator speeds evaporation of up to 50 samples at the same time using dry heat and nitrogen blow down. Unlike water bath heaters, the dry block heater requires less maintenance, no distilled water or additives, and adds no potential source of contamination.

Product Image-LBCP7701035

Vacuum concentrators, CentriVap® micro IR

Catalog Number: (LBCP7701035)
Supplier: LABCONCO
Description: The CentriVap micro IR vacuum concentrator has a very small footprint and therefore fits in tight spaces. It is ideal for small samples such as DNA and small throughput in molecular biology, proteomics, genomics, genetics, cell biology and drug discovery labs.
UOM: 1 * 1 items
Product Image-431-0234

Centrifugal concentrators, complete systems and system packages, CentriVap®

Supplier: LABCONCO
Description: CentriVap® vacuum concentrators are available as complete systems or system packages. The acid resistant model is recommended for corrosive solvents (TFA, acetic acid, and so on). Other models feature Heat Boost, which surrounds the chamber wall, to further speed evaporation of high boiling point solvents.

Product Image-LBCP7385035

Centrifugal Concentrators, Bench Top, CentriVap®

Supplier: LABCONCO
Description: CentriVap® vacuum concentrators are available in a range of configurations. The CentriVap® DNA model is supplied with a built-in 34 litres/min diaphragm pump, two 177 ml glass traps and a DNA rotor (60×1,5/2,0 and 72×0,5 ml). Model with glass lid is recommended for evaporation of solvents that are not compatible with acrylic (acetone, acetonitrile, ethanol, DMSO, etc.). The acid resistant model is recommended for corrosive solvents (TFA, acetic acid, etc.).

Product Image-LBCP7548800

Accessories for vacuum concentrators, centriVap® micro IR

Supplier: LABCONCO
Description: Rotor for 24×1,5 ml microcentrifuge tubes, PTFE coated aluminium

Product Image-LBCP7812035

Mobile concentrator system, CentriVap®

Supplier: LABCONCO
Description: This mobile system with or without heat boost combines the separate vacuum concentrator and cold trap components into one space-saving console and include casters for portability from laboratory to laboratory. A 12 to 13 mm rotor and solvent trap are also included. The interior can accommodate a vacuum pump — the only additional component necessary to begin processing.

Product Image-531-0193

Rotors and accessories for CentriVap® concentrators

Supplier: LABCONCO
Description: Hexagonal rotor, anodised aluminium, 132 holes for 1,5/2,0 ml microcentrifuge tubes, For: Labconco CentriVap®

Product Image-WHEA297883

Evaporative concentrators, Kuderna-Danish, WHEATON®

Catalog Number: (WHEA297883)
Supplier: DWK Life Sciences
Description: This unit is designed for the concentration of trace amounts of analytes in an organic solvent prior to analysis.
UOM: 1 * 1 items
Product Image-THSASPD210P2-230

Modular vacuum concentrators, Savant™ SpeedVac™

Supplier: THERMO SAVANT EC
Description: The Thermo Scientific™ Savant™ SpeedVac™ SPD210 vacuum concentrator is a large-capacity vacuum concentrator with a modular design, ideal for drying aqueous and organic solvents.

Image Unavailable-531-0025

Rotor for centrifugal evaporators, RC10-10 and RC10-22, Jouan

Catalog Number: (531-0025)
Supplier: JOUAN
Description: Rotor, sandwich, for 10×50 ml tubes (max. 29×103 mm), For: RC 10-10 & RC 10-22 centrifual evaporators
UOM: 1 * 1 items
Product Image-548-0727

VWR® Safe-T-Flex, Caps for Test Tubes

Supplier: VWR Collection
Description: Safe-T-Flex caps feature a unique, flexible, over-locking design, locking securely on the outside of the tube lip and can be removed with one hand. A tight seal ensures sample integrity and prevents spillage or evaporation of serum samples. This special seal protects against the aerosols of highly infectious organisms such as TB and the HTLV-III virus. They are colour coded for easy specimen identification and to help guard against cross-contamination. The top of each cap can also be numbered or labelled with indelible ink. Self-locking cap holds firmly in any position and keeps contents secure while in transit. Liquid-tight seal withstands centrifugation, agitation, refrigeration and freezing.

Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us on +353 1 88 22222.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us on +353 1 88 22222.
This product is marked as restricted and can only be purchased by approved Shipping Accounts. If you need further assistance, email VWR Regulatory Department at eurega_services@eu.vwr.com
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organisation. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
Product(s) marked with this symbol are discontinued - sold till end of stock. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service on +353 1 8822222.
1 - 16 of 4 324
no targeter for Bottom