Print…

You Searched For: Drying+Cabinets,+Glassware


6 751  results were found

Refine Results Sort by
SearchResultCount:"6751"

Sort Results

List View Easy View

Rate These Search Results

Product Image-466-0082

Drying cabinets

Supplier: LTE SCIENTIFIC
Description: Floor standing drying cabinets made of rust proofed steel, finished in textured epoxy with four adjustable reinforced chromium plated shelves. The sheathed heating elements, situated below a perforated base plate are vented either by natural convection or, for more rapid drying, via a top mounted extraction system, temperature control is by means of an energy regulator.

Product Image-B2..

Drying cabinets with glass doors

Supplier: LEEC LTD
Description: Drying cabinets are ideal for drying laboratory glassware, surgical instruments, theatrical wigs or media and can also be used for warming or simply for storage. These cabinets are rust resistant and finished in white powder coated paint with heatproof toughened glass doors and wire mesh shelves. The standard natural convection drying cabinets are supplied with a sliding stainless steel shutter on top for ventilation. The sliding door models LS and SS are wall mountable. Suitable for drying laboratory glassware, surgical instruments, theatrical wigs / costumes and media.

Why would you use an automatic colony counter?

Our VWR® colony counters range from low-cost units for quick counts to high-end models for extended applications and IQ/OQ

WATCH THE VIDEO

Consistency-Accuracy-Speed-Efficiency

C.A.S.E.
Product Image-466-0080

Drying cabinets with filtered air, Unitemp

Catalog Number: (466-0080)
Supplier: LTE SCIENTIFIC
Description: This drying cabinet has a fine filter on the input side of the fan heater system, so washed equipment is not soiled by 'dirty' air entering the cabinet. A hydraulic thermostat allows control of the air temperature from 5 °C above ambient to 65 °C and permits controlled drying of heat sensitive substances including plastics. The front panel is fitted with a mains on / off switch, neon lamps to indicate 'mains on' and 'heaters on' and a temperature control knob.
UOM: 1 * 1 items
Product Image-466-0076

Drying cabinets with sliding doors, Unitemp

Supplier: LTE SCIENTIFIC
Description: Simple compact cabinets, temperatures up to 85 °C can be obtained by means of an adjustable thermostat. All have fully adjustable shelves and toughened glass sliding doors. Models are available made either from polished stainless steel or from rust proofed steel finished in a textured, light grey, epoxy paint.

Product Image-466-0233

Drying cabinets, standard and insulated

Supplier: GENLAB
Description: These Genlab drying cabinets are suitable for general purpose warming applications and drying glassware or instruments. Made from sheet steel finished in an easy to clean powder coated paint. Fitted with adjustable shelf runners, removable plated wire grid shelves and ventilation holes. Insulated models (IWC) give energy savings of over 30% compared to the non-insulated range (DC). Heated by Incoloy sheathed elements in the base of the unit. The 500 and 1000 litre models have fan assistance as standard. All units have toughened glass doors; 125 and 250 litre models have sliding doors and the 500 and 1000 litre models have hinged doors. Units are controlled via a direct reading thermostat with calibrated scale and tamper-proof lock. The units also have an illuminated mains switch with heat indicator.

Product Image-466-0459

Drying cabinets, insulated, E3

Supplier: GENLAB
Description: These Genlab E3 drying cabinets are suitable for general purpose warming applications and drying glassware or instruments. All models in this range are fully insulated for improved efficiency and energy savings.

Product Image-141-0550

Liquid dispensers and other accessories

Supplier: MIELE
Description: G 7896 DOS cabinet: for 1 to 4 DOS modules with containers.

Product Image-84555.365

Detergents and cleaning agents, LABWASH® Premium

Supplier: VWR Chemicals
Description: A more concentrated version of the LABWASH® range.

MSDS Certificates Sale

Product Image-1.07570.2000

Cleansers, liquid concentrates and powders, for use with washing machines, AP series, Extran®, Supelco®

Supplier: Merck
Description: A range of cleansers, for machine washing and rinsing, that have been developed to meet the cleaning requirements for glassware and small equipment in the laboratory.

MSDS

Product Image-141-1596

SlimLine PLW 7111 Laboratory Glasswashers

Supplier: MIELE
Description: The PLW 7111 SlimLine laboratory washers offer a comprehensive and systematic solution for analytically pure reprocessing of laboratory glassware.

Image Unavailable-TUTTATS238-0493

Glassware Washer for Laboratories, TIVA8

Catalog Number: (TUTTATS238-0493)
Supplier: TUTTNAUER
Description: Tuttnauer's TIVA8 Lab line Washers contain unrivalled levels of efficiency that deliver on water and energy
savings. The high-quality system is specifically designed for research intensive laboratory settings that offer
automated cleaning and drying of typical laboratory glassware, as well as miscellaneous plastic items used in
research facilities.
UOM: 1 * 1 items

New Product


Product Image-MIEL10941940

Laboratory Glassware Washers, Large Capacity, PLW 8616

Supplier: MIELE
Description: The PLW 8616 laboratory washer can accommodate 216 laboratory flasks, 588 vials, or 294 pipettes. The large glassware washer is flexible and simple to use, it has modular load carriers and SimpleLoad system. This efficient unit has a double door, 900 mm wide, a usable capacity of 351 litres. PLW 8616 provides reliable results, high pump performance with a variable-speed pump and features spray arm monitoring and a conductivity meter.

Product Image-MIEL10131090

Accessories

Supplier: MIELE
Description: Glassware washing machines, UBS 3 conversion kit for load carriers without drying connection and welded pipe, For: PG 8

Product Image-141-0591

Laboratory and glassware washers, PG 8535 and PG 8536

Supplier: MIELE
Description: These cleaning and disinfection machines with integrated drying system and drawer have been designed for the treatment of clinical instruments and for washing laboratory glassware in research laboratories, biology and pharmaceutical industries. The new PG 85 range offers a wide range of innovations such as freely programmable PROFITRONIC+ controls, PerfectSpeed spray arm monitoring, temperature independent PerfectFlow dispensing control on the basis of ultrasound as well as PerfectPureSensor conductivity metering.

Product Image-466-0600

VWR® DRY-Line® Prime, Drying Ovens with Natural Convection

Supplier: VWR Collection
Description: DRY-Line® drying ovens are designed for all standard drying and tempering tasks as well as sterilising glassware. They have a temperature range between 50 to 300 °C and are intended for use in biological, chemical, medical, pharmaceutical and physical laboratories.

Sale

Product Image-141-0336

Baskets, mobile injectors, mobile units, covers and injector nozzles for laboratory glassware washing machines

Supplier: MIELE
Description: Accessories for Glassware washing machines, E 408 mobile injector unit with drying connection, for 96 pipettes up to 450 mm, with holder for ML/2 magnetic strip for automatic mobile unit recognition, For: PG 8535/3

Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us on +353 1 88 22222.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us on +353 1 88 22222.
This product is marked as restricted and can only be purchased by approved Shipping Accounts. If you need further assistance, email VWR Regulatory Department at eurega_services@eu.vwr.com
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organisation. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
Product(s) marked with this symbol are discontinued - sold till end of stock. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service on +353 1 8822222.
1 - 16 of 6 751
no targeter for Bottom