Print…

You Searched For: PE/LDPE/HDPE Stoppers

Low density, high density, or standard plastic stoppers gently insert into vessels to provide a vacuum tight seal. The cost efficient alternatives do not require the preparative greasing like ground glass counterparts. Solid or hollow models may feature a gripping handle or rotating nuts for easy application and extraction. Available in different diameter sizes, the PE, LDPE, and HDPE stoppers selection promises to close any apparatus to keep contents unpolluted.

Low density, high density, or standard plastic stoppers gently insert into vessels to provide a vacuum tight seal. The cost efficient alternatives do not require the preparative greasing like ground glass counterparts. Solid or hollow models may feature a gripping handle or rotating nuts for easy application and extraction. Available in different diameter sizes, the PE, LDPE, and HDPE stoppers selection promises to close any apparatus to keep contents unpolluted.


39  results were found

Refine Results Sort by
SearchResultCount:"39"

Sort Results

List View Easy View

Rate These Search Results

Image Unavailable-462-0585

VWR®, Drain Stoppers for VWB2 Water Baths

Catalog Number: (462-0585)
Supplier: VWR Collection
Description: Drain stoppers, VWR®
UOM: 1 * 5 items
Product Image-217-0215

VWR®, Stoppers for Standard Ground Joints

Supplier: VWR Collection
Description: Greaseless closure, which prevents ground joints from seizing. With inclined, circumferential sealing lips for better sealing and reduced risk of breakage. Easily detachable. With ergonomically shaped grip.

New Transparency for European Customers

Have you noticed our new improved visibility on stock location at checkout?

Find out more

Enhancement to stock locations

Product Image-SIMPT401-3W

Push-in stoppers for tubes

Supplier: Simport Scientific
Description: HDPE. Fit tubes of 15 ml capacity and 17 mm Ø.

Product Image-GRANUWB-DS

Drain stoppers for SAP and JBN baths

Catalog Number: (GRANUWB-DS)
Supplier: GRANT INSTRUMENTS
Description: Drain stoppers, recommended when using heat transfer beads, to prevent beads entering the drain hole.
UOM: 1 * 5 items
Product Image-720-2581

Stopper, IN-Stopper

Catalog Number: (720-2581)
Supplier: B. Braun
Description: IN-Stopper is a male luer lock closing cone with injection port for intermittent injections through injection membrane. It closes female accesses and offers a needle access via an injection membrane, e.g. to an infusion solution and has got a smooth, hygienic outer surface.
UOM: 1 * 100 items
Product Image-212-0575

VWR®, Stoppers, PE

Supplier: VWR Collection
Description: Stopper for test tubes Ø 12 to 16 mm, polyethylene, with tongues.

Sale

Product Image-217-0099

Stoppers, press down, VacuCap®

Supplier: Simport Scientific
Description: Ideal closures for glass and plastic reagent, sample and culture tubes, LDPE.

Product Image-SIMPT403R

Stoppers, universal caps, FitsAll™

Supplier: Simport Scientific
Description: Designed for easy-on, easy-off use. Cap removal is simple and quick. FitsAll™ closure is ideal for recapping most 12 and 16 mm O.D. evacuated glass blood collection tubes. Flexible FitsAll™ closures protect from aerosols of highly infectious microorganisms. They guard samples against cross-contamination and laboratory work areas against infection and spillage. Precision molded from low-density polyethylene, FitsAll™ fits firmly on the tube. Not suitable for autoclaving.

Product Image-SIMPT404-10N

Stoppers, flange plug caps

Supplier: Simport Scientific
Description: PE Plug type push-in caps and 2-position snap caps are made of polyethylene for test tubes with outside diameters of 12 or 17 mm. Dual position caps offer two possibilities: the closed but unsealed position where samples are maintained aerobic for microbiological procedures; and the fully sealed position where the cap is pushed tight to seal the tube for anaerobic use or for storage, transfer and centrifuge applications.

Product Image-BRAU4495209

Closing cones, Combi-Stoppers

Supplier: B. Braun
Description: These PE Combi-Stoppers are used for sealing male or female Luer-Lock and Luer-Slip connections.

Certificates

Product Image-BOHLH936-05

Stoppers, PTFE

Supplier: Bohlender
Description: For closing ground joint parts. With ground joint and sealing rings on the outside; knurled or hexagonal grip. Compared with glass stoppers, they are easily removable and can be used without grease.

Product Image-88318.

Stoppers for test tubes

Catalog Number: (88318.)
Supplier: KARTELL
Description: Stoppers for disposible tubes, PE.
UOM: 1 * 1.000 items
Product Image-217-9263

Stoppers for standard ground joints

Supplier: Brand
Description: PP or PE-LD, hollow, with sealing ribs and square or octagonal grip.

Product Image-217-0718

Polyethylene stoppers

Supplier: SciLabware
Description: These PE stoppers are ideally suited for use with glass or plastic volumetric flasks and measuring cylinders etc. which have longer 'B' length sockets.

Product Image-212-0547

Finned plugs for tubes

Supplier: KARTELL
Description: Finned plugs for disposable tubes 11 to 13 mm or 15 to 17 mm in diameter. The finned plug has been carefully designed. Available colours: Neutral (00), blue (04), red (10), green (12) and yellow (06).

Product Image-COWI010.129

Stoppers, flat type, PTFE

Supplier: COWIE
Description: PTFE. Stopper with flat head fit standard ground glass joints.

Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us on +353 1 88 22222.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us on +353 1 88 22222.
This product is marked as restricted and can only be purchased by approved Shipping Accounts. If you need further assistance, email VWR Regulatory Department at eurega_services@eu.vwr.com
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organisation. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
Product(s) marked with this symbol are discontinued - sold till end of stock. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service on +353 1 8822222.
1 - 16 of 39
no targeter for Bottom